Browse six product families and catalogue models, then shortlist equipment for one coordinated purchasing brief.
01Share the installation area and system brief. Module dimensions, electrical parameters and mounting need to work with the proposed array and inverter.
02Configure a home battery around essential loads, operating duration and the selected inverter. Appearance, mounting and expansion options are confirmed by model.
03Review the site supply, operating mode, load profile and battery pairing. Confirm the exact model and supported configuration before ordering.
04Plan cabinet integration around the business load profile, equipment location, system interfaces and local installation requirements.
05Start with a project brief covering demand, operating goals, site access, engineering interfaces and the proposed equipment supply boundary.
06Agree mounting, cabling, protection and monitoring as part of the overall system supply list, including what will be sourced by the local installer.
25 series. Batteries, integrated storage, power conversion and foldable solar.
25 series shown
Modular rack batteries for residential solar-storage integration with a compatible inverter.
A 51.2 V battery platform selected by energy capacity and installation format.
Choose a stacked, rack or upright enclosure for the available installation space.
Modular capacity options for household solar consumption and backup planning.
Low-voltage cabinet batteries for integration with a compatible inverter.
Integrated inverter and battery: compare PV input, battery energy and AC output separately.
High-voltage battery racks for integration with separately specified PCS and controls.
Size battery energy separately from AC power; specify PCS and operating modes for the project.
Size battery energy separately from AC power; specify PCS and operating modes for the project.
Product families retained from the original company brochure.
Select by power and required duration; define the complete configuration in the technical offer.
Integrated battery, PCS and controls with project-specific parallel configurations.
Air-cooled AC storage system for commercial and industrial sites.
Supports scheduled charge/discharge, EMS export control and remote operation.
Direct PV integration with battery storage, power conversion and system controls.
Containerised battery storage for utility, generation-side and large industrial integration.
Supports unbalanced three-phase loads and power-quality management.
Independent cooling ducts for high-voltage battery systems and multi-unit configurations.
High-voltage battery interface with three-phase output and remote monitoring.
For off-grid and backup systems: 4 kW uses a 24 V battery, while 6/12 kW use 48 V.
Integrates PCS and a step-up transformer for large energy-storage plants.
Up to 24 battery inputs for cluster-level charge and discharge management.
Transportable PV, battery and diesel configurations for temporary and off-grid power.
Combine a foldable PV array and storage; plan deployment around footprint and setup time.
Transportable foldable PV arrays for larger temporary generation and storage-integrated projects.
Explore the pretty storage product range. Model references identify the technical configurations; availability, branding and OEM / ODM scope are confirmed in the offer.
Complete product tables, including the source’s qualifications and missing values.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 5–6 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | LNFZ-R-10KWh | LNFZ-R-14KWh | LNFZ C-51J314 |
|---|---|---|---|
| Nominal energy | 10.547 kWh | 14.336 kWh | 16.076 kWh |
| Rated capacity | 206 Ah | 280 Ah | 314 Ah |
| Nominal voltage | 51.2 V | ||
| Charge cut-off | 58.4 V | ||
| Operating voltage | 40–58.4 V | ||
| Discharge cut-off | 40 V | ||
| Standard charge current | 61 A | 140 A | 150 A |
| Standard discharge current | 103 A | 140 A | 150 A |
| Dimensions W/H/D (mm) | 408/602/285 | 408/717/285 | 408/717/285 |
| Weight | 78.3 kg | 106 kg | 109.8 kg |
Cycle end-of-life criterion is not supplied. Confirm the source dimension order against the installation drawing.
| Specification | LNFZ-R-10KWh | LNFZ-R-14KWh | LNFZ C-51J314 |
|---|---|---|---|
| Chemistry / configuration | LFP / 1P16S | ||
| Ingress protection | IP21 | ||
| Altitude | <2,000 m | ||
| Charge temperature | 0–55°C | ||
| Discharge temperature | −10–60°C | ||
| Storage humidity | 5–70% RH | ||
| Communication | CAN / RS485 | ||
| Source cycle figure | 6,000 @ 0.5C, 80% DOD, 25°C | ||
Cycle end-of-life criterion is not supplied. Confirm the source dimension order against the installation drawing.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 7–8 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | LNFZ-W-5KWh | LNFZ-F-10KWh |
|---|---|---|
| Nominal energy (kWh) | 5.120 | 10.547 |
| Capacity (Ah) | 100 | 206 |
| Nominal voltage | 51.2 V | |
| Operating voltage | 40–58.4 V | |
| Charge / discharge cut-off | 58.4 / 40 V | |
| Standard charge current (A) | 50 | 61 |
| Standard discharge current (A) | 100 | 103 |
| Dimensions W/H/D (mm) | 432/214/492 | 500/280/626 |
| Weight (kg) | 44.6 | 80 |
| Chemistry / configuration | LFP / 1P16S | |
| Protection / altitude | IP21 / <2,000 m | |
| Charge / discharge temperature | 0–45°C / −20–55°C | |
| Storage humidity | 5–70% RH | |
| Communication | CAN / RS485 | |
| Source cycle figure | 6,000 @ 0.5C, 80% DOD, 25°C | |
Series illustration. Confirm dimension order and cycle end-of-life criterion.
| Specification | LNFZ-F-14KWh | LNFZ-F-16KWh |
|---|---|---|
| Nominal energy (kWh) | 14.336 | 16.076 |
| Capacity (Ah) | 280 | 314 |
| Nominal voltage | 51.2 V | |
| Operating voltage | 40–58.4 V | |
| Charge / discharge cut-off | 58.4 / 40 V | |
| Standard charge current (A) | 140 | 150 |
| Standard discharge current (A) | 140 | 150 |
| Dimensions W/H/D (mm) | 408/326/842 | 825/420/345 |
| Weight (kg) | 110 | 113 |
| Chemistry / configuration | LFP / 1P16S | |
| Protection / altitude | IP21 / <2,000 m | |
| Charge / discharge temperature | 0–45°C / −20–55°C | |
| Storage humidity | 5–70% RH | |
| Communication | CAN / RS485 | |
| Source cycle figure | 6,000 @ 0.5C, 80% DOD, 25°C | |
Series illustration. Confirm dimension order and cycle end-of-life criterion.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 9 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | Stacked | Rack | Upright |
|---|---|---|---|
| Catalogue energy range | 15–16 kWh | 15–16 kWh | 30–32 kWh |
| Voltage family | 48 V | ||
| Model / full electrical data | To confirm | ||
| Dimensions / weight / interfaces | To confirm | ||
Overview data only; LNFZ or HLY specifications must not be substituted.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 10 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | 5K | 10K | 15K | 20K | 25K |
|---|---|---|---|---|---|
| System energy | 5.12 kWh | 10.24 kWh | 15.36 kWh | 20.48 kWh | 25.60 kWh |
| Full model | HLY-DLS01601Z*K-V1.0 | ||||
| Cell specification | LFP / 100 Ah / 3.2 V | ||||
| Nominal battery voltage | 51.2 V DC | ||||
| Charge / discharge rate | 0.5C | ||||
| Charge / discharge cut-off | 58.4 / 43.2 V | ||||
| Paired AC voltage | 220 / 230 / 240 V AC | ||||
| Paired inverter power | 6 / 12 kW; confirm configuration | ||||
| Operating temperature | −20–40°C | ||||
| Storage temperature | −30–50°C | ||||
| Humidity | ≤95%, non-condensing | ||||
| Protection | Overcurrent, overcharge/discharge, overtemperature, short circuit | ||||
| Balancing | Yes | ||||
| Source cycle figure | ≥8,000 @ 0.5C, 25±2°C, EOL ≥70% | ||||
| Source-listed standards / documents* | IEC62619 / IEC61000-6-3 / IEC61000-6-1 / UN38.3 / MSDS | ||||
The 6/12 kW and AC voltage figures apply with a paired inverter, not to the battery alone.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 11–12 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-DLS01601Z10.5K | HLY-DLS01601Z14.3K | HLY-DLS01601Z16K |
|---|---|---|---|
| Nominal energy | 10.5 kWh | 14.3 kWh | 16 kWh |
| LFP cell capacity | 205 Ah | 280 Ah | 314 Ah |
| Battery configuration | 1P16S | ||
| W×D×H excluding castors | 570.4 × 328.8 × 734.6 mm | ||
| Weight | ≈120 kg | ≈140 kg | ≈140 kg |
| Nominal voltage | 51.2 V | ||
| Charge / discharge cut-off | 58.4 / 43.2 V | ||
| Communication | CAN / RS485 / Bluetooth | ||
| Ingress protection | IP54 | ||
| Operating temperature | −20–40°C | ||
The source reuses these model codes for the all-in-one series. Specify battery-only or all-in-one when enquiring.
| Specification | HLY-DLS01601Z10.5K | HLY-DLS01601Z14.3K | HLY-DLS01601Z16K |
|---|---|---|---|
| Altitude | <1,000 m | ||
| Humidity | ≤95%, non-condensing | ||
| Source cycle figure | ≥8,000 @ 0.5C, 25±2°C, EOL ≥70% | ||
| Storage temperature | −30–50°C | ||
| Enclosure material | 1.5 mm carbon steel | ||
| Enclosure finish | Signal white, textured | ||
| Source-listed standards / documents* | IEC62619 / IEC61000 / UN38.3 / MSDS | ||
The source reuses these model codes for the all-in-one series. Specify battery-only or all-in-one when enquiring.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 13–14 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-DLS01601Z10.5K | HLY-DLS01601Z14.3K | HLY-DLS01601Z16K |
|---|---|---|---|
| Battery energy | 10.5 kWh | 14.3 kWh | 16 kWh |
| LFP cell capacity | 205 Ah | 280 Ah | 314 Ah |
| Rated AC power | 5 kW | 7 kW | 8 kW |
| AC input / output current | 22.7 A | 31.8 A | 36.4 A |
| Rated battery discharge current | 100 A | 140 A | 157 A |
| MPPT trackers | 1 | 2 | 2 |
| Maximum PV voltage | 500 V | ||
| MPPT voltage range | 85–450 V | ||
| PV rated / start voltage | 380 / 75 V | ||
| AC input voltage | 90–280 V | ||
Source model codes overlap with battery-only cabinets; specify the all-in-one configuration.
| Specification | HLY-DLS01601Z10.5K | HLY-DLS01601Z14.3K | HLY-DLS01601Z16K |
|---|---|---|---|
| AC input frequency range | 40–65 Hz | ||
| AC output voltage | 220 / 230 / 240 V | ||
| Rated frequency | 50 / 60 Hz | ||
| Transfer time | 10 ms | ||
| W×D×H excluding castors | 700 × 245 × 1,200 mm | ||
| Weight | ≈135 kg | ≈156 kg | ≈165 kg |
| Nominal voltage | 51.2 V | ||
| Charge / discharge cut-off | 58.4 / 43.2 V | ||
| Communication | CAN / RS485 / Bluetooth | ||
| Ingress protection | IP54 | ||
| Operating temperature | −20–40°C | ||
| Altitude | <1,000 m | ||
| Humidity | ≤95%, non-condensing | ||
| Source cycle figure | ≥8,000 @ 0.5C, 25±2°C, EOL ≥70% | ||
| Source-listed standards / documents* | IEC62619 / IEC61000 / UN38.3 / MSDS | ||
Source model codes overlap with battery-only cabinets; specify the all-in-one configuration.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 15 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | LNFZ-R-64KWh | LNFZ-R-192KWh |
|---|---|---|
| Catalogue energy class | 64 kWh | 192 kWh |
| Nominal energy | To confirm | 192.9216 kWh |
| Nominal voltage | To confirm | 614.4 V |
| Capacity | 314 Ah | |
| Standard charge / discharge | 150 / 150 A | |
| Operating voltage | 172.8–233.6 V | 518.4–700.8 V |
| Charge cut-off | 233.6 V | 700.8 V |
| Discharge cut-off | 172.8 V | 518.4 V |
| Weight | 480 kg | 1,500 kg |
| Charge / discharge temperature | 0–55°C / −10–60°C | |
| Storage humidity | 5–75% RH | |
| Source cycle figure | ≥8,000; test conditions to confirm | |
The 64 kWh source voltage and energy conflict. Confirm mechanical dimensions and final configuration.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 16–17 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | LNFZ-C-64KWh | LNFZ-C-80KWh | LNFZ-C-96KWh |
|---|---|---|---|
| Nominal energy (kWh) | 64.181 | 80.384 | 96.4608 |
| Nominal voltage (V) | To confirm | 256 | 307.2 |
| Charge cut-off (V) | 233.6 | 292 | 350.4 |
| Operating voltage (V) | 172.8-233.6 | 216-292 | 259.2-350.4 |
| Discharge cut-off (V) | 172.8 | 216 | 259.2 |
| Weight (kg) | 580 | 680 | 780 |
| Rated capacity | 314 Ah | ||
| Standard charge / discharge | 150 / 150 A | ||
| Chemistry | LFP | ||
| Charge / discharge temperature | 0–55°C / −10–60°C | ||
| Storage humidity | 5–75% RH | ||
| Dimensions / final configuration | Confirm model drawing | ||
Source data for 64 and 257 kWh models contain conflicts; other series are not used as substitutes.
| Specification | LNFZ-C-112KWh | LNFZ-C-128KWh | LNFZ-C-145KWh |
|---|---|---|---|
| Nominal energy (kWh) | 112.5376 | 128.6144 | 144.6912 |
| Nominal voltage (V) | 358.4 | 409.6 | 460.8 |
| Charge cut-off (V) | 408.8 | 467.2 | 525.6 |
| Operating voltage (V) | 302.4-408.8 | 345.6-467.2 | 388.8-525.6 |
| Discharge cut-off (V) | 302.4 | 345.6 | 388.8 |
| Weight (kg) | 880 | 1,180 | 1,280 |
| Rated capacity | 314 Ah | ||
| Standard charge / discharge | 150 / 150 A | ||
| Chemistry | LFP | ||
| Charge / discharge temperature | 0–55°C / −10–60°C | ||
| Storage humidity | 5–75% RH | ||
| Dimensions / final configuration | Confirm model drawing | ||
Source data for 64 and 257 kWh models contain conflicts; other series are not used as substitutes.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 18–19 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | LNFZ-C-161KWh | LNFZ-C-177KWh | LNFZ-C-193KWh | LNFZ-C-209KWh |
|---|---|---|---|---|
| Nominal energy (kWh) | 160.768 | 176.8448 | 192.9216 | 208.9984 |
| Capacity (Ah) | 314 | 314 | 314 | 314 |
| Nominal voltage (V) | 512 | 563.2 | 614.4 | 665.6 |
| Charge cut-off (V) | 584 | 642.4 | 700.8 | 759.2 |
| Operating voltage (V) | 432-584 | 475.2-642.4 | 518.4-700.8 | 561.6-759.2 |
| Discharge cut-off (V) | 432 | 475.2 | 518.4 | 561.6 |
| Standard charge / discharge (A) | 150 | 150 | 150 | 150 |
| Weight (kg) | 1,380 | 1,480 | 1,580 | 1,680 |
| Chemistry | LFP | |||
| Charge / discharge temperature | 0–55°C / −10–60°C | |||
| Storage humidity | 5–75% RH | |||
| Dimensions / final configuration | Confirm model drawing | |||
| Enclosure rating (series) | IP55 | |||
| Maintenance (series) | OTA; confirm controller configuration | |||
Source data for 64 and 257 kWh models contain conflicts; other series are not used as substitutes.
| Specification | LNFZ-C-225KWh | LNFZ-C-241KWh | LNFZ-C-257KWh |
|---|---|---|---|
| Nominal energy (kWh) | 225.0752 | 241.152 | To confirm |
| Capacity (Ah) | 314 | 314 | 628 |
| Nominal voltage (V) | 716.8 | 768 | To confirm |
| Charge cut-off (V) | 821.3 | 879.7 | 467.2 |
| Operating voltage (V) | 607.5-821.3 | 650.7-879.7 | 345.6-467.2 |
| Discharge cut-off (V) | 607.5 | 650.7 | 345.6 |
| Standard charge / discharge (A) | 150 | 150 | 200 |
| Weight (kg) | 1,780 | 1,880 | 2,000 |
| Chemistry | LFP | ||
| Charge / discharge temperature | 0–55°C / −10–60°C | ||
| Storage humidity | 5–75% RH | ||
| Dimensions / final configuration | Confirm model drawing | ||
| Enclosure rating (series) | IP55 | ||
| Maintenance (series) | OTA; confirm controller configuration | ||
Source data for 64 and 257 kWh models contain conflicts; other series are not used as substitutes.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 20 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | 71 kWh DC | 50 kW / 135 kWh |
|---|---|---|
| Architecture | DC battery cabinet | PV-storage cabinet |
| Storage energy | 71 kWh | 135 kWh |
| Listed power | Not supplied | 50 kW |
| Cooling | Air-conditioned air cooling | |
| Voltage / dimensions / interfaces | To confirm | |
Overview data only; request the exact model datasheet.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 21 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | 100 kW / 215 kWh | 125 kW / 261 kWh |
|---|---|---|
| Storage energy | 215 kWh | 261 kWh |
| Rated power | 100 kW | 125 kW |
| Architecture | AC/DC integrated | |
| Cooling | Liquid cooling | |
| Voltage / dimensions / interfaces | To confirm | |
Listed separately from HLY models; equal energy ratings do not imply identical products.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 22–24 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-ELS24001Y215K | HLY-ELS26001Y232K | HLY-ELS24001Y241K | HLY-ELS26001Y261K |
|---|---|---|---|---|
| Battery energy | 215 kWh | 232 kWh | 241 kWh | 261 kWh |
| Rated power | 100 kW | 125 kW | 125 kW | 125 kW |
| Cell specification | LFP 3.2 V / 280 Ah | LFP 3.2 V / 280 Ah | LFP 3.2 V / 314 Ah | LFP 3.2 V / 314 Ah |
| Nominal DC voltage | 768 V | 832 V | 768 V | 832 V |
| DC voltage range | 648–876 V | 702–949 V | 648–876 V | 702–949 V |
| Grid voltage | 400 V | |||
| Rated AC current | 144 A | 180 A | 180 A | 180 A |
| THDi at rated power | <2.5% | <3% | <3% | <3% |
| Grid frequency | 50 / 60 Hz | |||
| AC overload | 1.1× continuous; 1.2× 1 min | |||
Verify certification by exact model, certificate and supplying entity; supplier certificates do not automatically certify the offered configuration.
| Specification | HLY-ELS24001Y215K | HLY-ELS26001Y232K | HLY-ELS24001Y241K | HLY-ELS26001Y261K |
|---|---|---|---|---|
| Rated power factor | >0.99 | |||
| Adjustable power factor | −1 to +1 | |||
| Battery thermal management | Liquid cooling/heating, 50% glycol-water | |||
| AC-side cooling | Air cooling | |||
| Fire suppression | Aerosol | |||
| Protection / corrosion class | IP55 / C3; C4, C5 optional | |||
| Operating / storage temperature | −20–55°C / −20–45°C | |||
| Storage condition | SOC 30–50%, <6 months | |||
| Humidity | 0–95% RH, non-condensing | |||
| Installation | Outdoor | |||
| Altitude | ≤2,000 m; derate above | |||
| Communication | Ethernet / RS485 | |||
Verify certification by exact model, certificate and supplying entity; supplier certificates do not automatically certify the offered configuration.
| Specification | HLY-ELS24001Y215K | HLY-ELS26001Y232K | HLY-ELS24001Y241K | HLY-ELS26001Y261K |
|---|---|---|---|---|
| Protocols | Modbus TCP / RTU / MQTT | |||
| Dimensions W×D×H | 1,000 × 1,350 × 2,390 mm | |||
| Weight | 2,500±150 kg | 2,600±150 kg | 2,500±150 kg | 2,600±150 kg |
| Source cycle figure | ≥8,000 @ 0.5C, 25±2°C, EOL ≥70% | |||
| Source-listed standards / documents* | None listed | IEC62619 / IEC61000 / RoHS / UN38.3 / MSDS | GB/T36276 / IEC62619 / IEC63056 / IEC62477 / IEC61000 / RoHS / UN38.3 / MSDS | GB/T36276 / IEC62619 / IEC63056 / IEC62477 / IEC61000 / RoHS / UN38.3 / MSDS |
Verify certification by exact model, certificate and supplying entity; supplier certificates do not automatically certify the offered configuration.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 25–26 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-ELS11201F 112K |
|---|---|
| Battery energy | 112 kWh |
| Rated AC power | 50 kW |
| Cell specification | LFP / 3.2 V / 314 Ah |
| Module / system configuration | 1P16S / 1P112S |
| Battery voltage range | 280–408.8 V |
| Maximum DC current | 150 A |
| AC voltage | 400 / 230 V |
| Rated AC current | 73 A |
| Frequency | 50 Hz (47–52 Hz) / 60 Hz (57–62 Hz) |
| Harmonics (>30% load) | <3% |
The similarly named 112K PV-storage model has different PV, voltage and dimension data.
| Specification | HLY-ELS11201F 112K |
|---|---|
| Dimensions | 1,350 × 1,295 × 2,377 mm |
| Communication | CAN / Ethernet |
| Protection | IP54 |
| Fire suppression | Aerosol + multi-sensor detector |
| Operating temperature | −20–50°C |
| Humidity | 0–95%, non-condensing |
| Altitude | ≤2,000 m; derate above |
The similarly named 112K PV-storage model has different PV, voltage and dimension data.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 27–28 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-ELS24001F 241K |
|---|---|
| Installed energy | 241.152 kWh |
| Rated AC power | 100 kW |
| DC voltage range | 600–876 V |
| Maximum DC current | 150 A |
| Maximum DC power | 100 kW |
| AC voltage / wiring | 380 V / 3/N/PE |
| Grid frequency | 50±2.5 Hz |
| Grid voltage tolerance | −10% / +15% |
| THDi at full load | ≤3% |
| Power factor | −1 to +1 |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
| Specification | HLY-ELS24001F 241K |
|---|---|
| Energy efficiency at rated condition | ≥88% |
| Operating temperature | −20–50°C |
| Humidity | ≤95%, non-condensing |
| Noise | ≤65 dB |
| Cooling | Smart air cooling |
| Fire suppression | Automatic perfluorohexanone system |
| Protection / altitude | IP55 / ≤2,000 m; derate above |
| Weight | 3.2 t |
| Communication interfaces | 4G / LAN / EtherCAT / RS485 |
| Protocols | Modbus TCP / IEC104 |
| Dimensions W×D×H | 1,600 × 1,100 × 2,360 mm |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 29–31 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-ELS06401F64K | HLY-ELS11201F112K | HLY-ELS15601Y157K | HLY-ELS26001Y261K |
|---|---|---|---|---|
| Battery energy | 64 kWh | 112 kWh | 157 kWh | 261 kWh |
| Cell | LFP / 3.2 V / 314 Ah | |||
| Nominal voltage | 204.8 V | 358.4 V | 499.2 V | 832 V |
| Battery voltage range | 172.8–233.6 V | 302.4–408.8 V | 421.2–569.4 V | 702–949 V |
| Grid / off-grid rated power | 30 kW | 30 / 50 kW | 30 / 60 kW | 125 kW |
| Grid rated current | 43.5 A | 43.5 / 72.5 A | 43.5 / 87 A | 180.4 / 189.9 A |
| Off-grid maximum current | 48 A | 48 / 80 A | 48 / 96 A | 250 A |
| Battery thermal management | Air cooling | Air cooling | Liquid cooling/heati ng | Liquid cooling/heati ng |
| Maximum PV power | 38.4 + 38.4 kW | 38.4 + 38.4 kW | 38.4 + 38.4 kW | 240 kW |
| Maximum PV voltage | 850 V | 850 V | 850 V | 1,000 V |
Power options depend on configuration; the 261K storage cabinet and PV-integrated model have different dimensions.
| Specification | HLY-ELS06401F64K | HLY-ELS11201F112K | HLY-ELS15601Y157K | HLY-ELS26001Y261K |
|---|---|---|---|---|
| PV start voltage | 250 V | 250 V | 250 V | 180 V |
| MPPT range | 200–800 V | 200–800 V | 200–800 V | 150–950 V |
| Maximum PV current | 64 + 64 A | 64 + 64 A | 64 + 64 A | 10 × 42 A |
| AC voltage | 400 / 230 V | |||
| Frequency | 50±2.5 Hz | 50±2.5 Hz | 50±2.5 Hz | 50 / 60 Hz |
| Overload | 1.1× continuous; 1.2× 1 min | |||
| Grid THDi | <3% | |||
| Off-grid THDu | <3% | <3% | <3% | <2% |
| Adjustable power factor | −1 to +1 | |||
| Grid transfer time | <10 ms | |||
| Fire suppression | Aerosol | |||
| Protection / corrosion class | IP55 / C3; C4, C5 optional | |||
| Operating temperature | −20–55°C | |||
| Humidity | 0–95% RH, non-condensing | |||
Power options depend on configuration; the 261K storage cabinet and PV-integrated model have different dimensions.
| Specification | HLY-ELS06401F64K | HLY-ELS11201F112K | HLY-ELS15601Y157K | HLY-ELS26001Y261K |
|---|---|---|---|---|
| Interfaces / protocols | Ethernet / RS485; Modbus TCP / RTU | |||
| Dimensions W×D×H (mm) | 1,100×900×940 | 1,350×1,160×2,277 | 1,000×1,350×1,880 | 1,000×1,390×2,390 |
| Weight | 900±150 kg | 1,900±150 kg | 1,800±150 kg | 2,600±150 kg |
| Source cycle figure | ≥8,000 @ 0.5C, 25±2°C, EOL ≥70% | |||
| Source-listed standards / documents* | GB/T36276 / IEC62619 / IEC63056 / IEC62477 / IEC61000 / RoHS / UN38.3 / MSDS | |||
Power options depend on configuration; the 261K storage cabinet and PV-integrated model have different dimensions.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 32–33 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-SLS41606Y2.5M | HLY-SLS41608Y3.34M | HLY-SLS41610Y4.18M | HLY-SLS41612Y5M |
|---|---|---|---|---|
| Rated energy | 2.5 MWh | 3.34 MWh | 4.18 MWh | 5 MWh |
| Rated power (source) | 1.25 MW | 1.7 MW | 2.15 MW | 2.5 MW |
| Rated charge / discharge current | 942 A | 1,256 A | 1,570 A | 1,884 A |
| Weight | ≈27 t | ≈33 t | ≈38 t | ≈43 t |
| Dimensions W×D×H | 6,058 × 2,438 × 2,896 mm | |||
| Cell specification | LFP / 314 Ah / 3.2 V | |||
| Rated voltage | 1,331.2 V DC | |||
| Operating voltage | 1,123.2–1,518.4 V DC | |||
| Charge / discharge rate | 0.5C | |||
| Energy efficiency (source) | ≥92% | |||
Confirm PCS scope and usable SOC window when matching the 1,518.4 V upper limit to 1,500 V PCS equipment.
| Specification | HLY-SLS41606Y2.5M | HLY-SLS41608Y3.34M | HLY-SLS41610Y4.18M | HLY-SLS41612Y5M |
|---|---|---|---|---|
| Storage temperature | −20–40°C | |||
| Operating temperature | −40–60°C | |||
| Humidity | ≤95%, non-condensing | |||
| Thermal management | Liquid cooling, 50% glycol-water | |||
| Protection | IP55 | |||
| Fire suppression | Aerosol / perfluorohexanone (optional) | |||
| Protection functions | Short circuit, overcharge/discharge, overtemperature, surge | |||
| Fire detection / E-stop / UPS | Yes / Yes / Yes | |||
| Source-listed standards / documents* | UN38.3 / MSDS / IEC62933 / EN61000 / IEC62477 / IEC62619 / IEC63056 | |||
Confirm PCS scope and usable SOC window when matching the 1,518.4 V upper limit to 1,500 V PCS equipment.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 34–35 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-1000-M-04/100-SKWN |
|---|---|
| Rated / maximum AC power | 100 / 110 kW |
| Maximum DC power | 110 kW |
| Maximum DC voltage | 1,000 V |
| DC voltage range | 680–1,000 V |
| Maximum DC current | 162 A |
| Rated / maximum AC current | 152 / 167 A |
| AC voltage | 380 V |
| Grid voltage range | 323–418 V |
| AC wiring | Three-phase four-wire, transformerless |
| Reactive power | −100 to +100 kvar |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
| Specification | HLY-1000-M-04/100-SKWN |
|---|---|
| Rated frequency / tolerance | 50 Hz / ±5 Hz |
| Charge/discharge transition | <20 ms |
| Off-grid output | 380 V / 100 kW / 50 Hz |
| Maximum efficiency | 98.5% |
| Overload | 1.1× continuous @45°C; 1.2× 1 min; 1.3× 1 s |
| Cable entry | Top DC entry; front AC exit |
| Ambient temperature | −30–60°C; derate above 50°C |
| Relative humidity | 0–100% RH |
| Altitude | 4,000 m; derate above 2,000 m |
| Noise | ≤75 dB @1 m, full load |
| Dimensions W×D×H | 250 × 750 × 680 mm |
| Weight | 85 kg |
| Protection / cooling | IP65 / water cooling |
| Communication interfaces | RS485 / Ethernet / EtherCAT / CAN |
| Protocols | Modbus RTU / TCP / CAN2.0B / IEC61850 |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 36–38 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-600-07-186 | HLY-600-07-215 |
|---|---|---|
| Rated AC power | 186 kW | 215 kW |
| Maximum AC power | 205 kW | 237 kW |
| Maximum DC power | 209 kW | 241 kW |
| Maximum DC current | 199 A | 230 A |
| Maximum / operating DC voltage | 1,500 V / 1,000–1,500 V | |
| Rated / maximum AC current | 156 / 172 A | 180 / 198 A |
| Reactive power | ±196 kvar | ±226 kvar |
| AC wiring / isolation | Three-phase three-wire, non-isolated | |
| Rated / operating grid voltage | 690 V / 621–759 V | |
| Rated frequency / tolerance | 50 Hz / ±5 Hz | |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
| Specification | HLY-600-07-186 | HLY-600-07-215 |
|---|---|---|
| Power factor | −1 to +1 | |
| Charge/discharge transition | <30 ms | |
| Off-grid voltage | 690 V, configurable | |
| Off-grid voltage deviation | <1% Un, balanced linear load | |
| Voltage unbalance | <2%, 4% transient | |
| Off-grid THDu | <3%, linear load | |
| DC component | <0.1% Un | |
| Maximum efficiency | 99% | |
| Overload | 1.1× continuous @45°C; 1.2× >1 min | |
| Ambient temperature | −40–60°C; derate above 50°C | |
| Relative humidity | 0–100% | |
| Altitude | 5,000 m; derate above 4,000 m | |
| Noise | <75 dB | |
| Dimensions W×D×H | 275 × 640 × 840 mm | |
| Weight | <100 kg | |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
| Specification | HLY-600-07-186 | HLY-600-07-215 |
|---|---|---|
| Protection / cooling | IP66 / smart air cooling | |
| Cable entry | Bottom | |
| Interfaces | RS485 / CAN / Ethernet / DIO | |
| Display | LED | |
| Protocols | Modbus RTU / CAN2.0B / EtherCAT | |
Figures apply to the listed models. Options, operating conditions and supply scope are defined in the technical agreement.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 39–41 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-10KH3 | HLY-12KH3 | HLY-15KH3 |
|---|---|---|---|
| Rated AC power | 10 kW | 12 kW | 15 kW |
| Rated AC current | 14.5 A | 17.4 A | 21.7 A |
| Instantaneous peak output | 11 kVA | 13.2 kVA | 16.5 kVA |
| Recommended max PV power (source) | 22.8 kW | ||
| Maximum PV voltage | 1,000 V | ||
| MPPT range / start voltage | 200–850 V / 200 V | ||
| MPPT trackers / strings | 2 / 1+2 | ||
| MPPT max / short-circuit current | 15+30 A / 19.5+40 A | ||
| AC voltage / wiring | 400 V / L1,L2,L3,N,PE | ||
| Frequency | 50 / 60 Hz | ||
The source appears to mislabel 99.9% and 98% efficiency fields; values are not silently reassigned. Warranty is contractual.
| Specification | HLY-10KH3 | HLY-12KH3 | HLY-15KH3 |
|---|---|---|---|
| THDi | <3% | ||
| Power factor (source) | −0.8 to +0.8 | ||
| Battery type | Lead-acid / LFP | ||
| Battery voltage range / nominal | 160–800 V / 400 V | ||
| Maximum battery charge/discharg e | 50 A | ||
| Battery communication | RS485 / CAN | ||
| Transfer time | <10 ms | ||
| European efficiency | 97.5% | ||
| Battery charge/discharge efficiency | 97% | ||
| Peak / MPPT efficiency | Source labels misaligned; to confirm | ||
| Protection | PV/battery reverse polarity, short circuit, overvoltage, insulation, leakage, anti-islanding | ||
| Surge protection | PV Type III / AC Type III | ||
| Protection | IP65 | ||
| Temperature / humidity | −20–60°C / 10–90% RH | ||
| Mounting / cooling | Wall mount / smart cooling | ||
The source appears to mislabel 99.9% and 98% efficiency fields; values are not silently reassigned. Warranty is contractual.
| Specification | HLY-10KH3 | HLY-12KH3 | HLY-15KH3 |
|---|---|---|---|
| Communication / display | Wi-Fi / RS485 / CAN / GPRS; LCD / APP | ||
| Dimensions L×W×H | 480 × 425 × 202 mm | ||
| Net weight | 25 kg | 26 kg | 27 kg |
| Package dimensions | 637 × 545 × 326 mm | ||
| Gross weight | 29 kg | 30 kg | 31 kg |
The source appears to mislabel 99.9% and 98% efficiency fields; values are not silently reassigned. Warranty is contractual.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 42–44 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-4K-SF EU | HLY-6K-SF EU | HLY-12K-SF EU |
|---|---|---|---|
| Rated off-grid power | 4 kW | 6 kW | 12 kW |
| Rated output current | 18.2 A | 27.3 A | 54.5 A |
| Peak output for 5 s | 8 kVA | 12 kVA | 24 kVA |
| Recommended max PV power | 4 kW | 6 kW | 12 kW |
| Maximum PV voltage | 500 V | ||
| MPPT range | 85–450 V | ||
| PV start voltage | 85 V | 75 V | 75 V |
| MPPT trackers | 1 | 1 | 2 |
| Strings per MPPT | 1 | ||
| MPPT maximum current | 15 A | 27 A | 27 / 27 A |
The source MPPT field contains a percentage; presented as efficiency. Confirm warranty and battery compatibility.
| Specification | HLY-4K-SF EU | HLY-6K-SF EU | HLY-12K-SF EU |
|---|---|---|---|
| MPPT short-circuit current | 18 A | 35 A | 35 / 35 A |
| Maximum AC input power | 5 kW | 11.5 kW | 16 kW |
| Maximum AC input current | 28 A | 50 A | 90 A |
| AC voltage / frequency | 220 / 230 / 240 V; 50 / 60 Hz | ||
| AC input range | UPS:170–280 V; load mode:90–280 V | ||
| Battery type | LFP / lead-acid | ||
| Battery range / nominal voltage | 20–30 / 24 V DC | 40–60 / 48 V DC | 40–60 / 48 V DC |
| Maximum charge / discharge current | 120 / 160 A | 120 / 130 A | 210 / 230 A |
| Battery communication | RS485 | ||
| Parallel operation | Not supported | Up to 12 units | Up to 12 units |
| THDi (linear load) | <3% | ||
| Transfer time | UPS:10 ms; load mode:20 ms | ||
| Peak efficiency | 95% | 98% | 98% |
| MPPT efficiency (source) | 99.9% | ||
| Standby consumption | <10 W | <10 W | <20 W |
| Protection | IP54 | ||
| Temperature / humidity | −10–55°C / 5–95% RH | ||
The source MPPT field contains a percentage; presented as efficiency. Confirm warranty and battery compatibility.
| Specification | HLY-4K-SF EU | HLY-6K-SF EU | HLY-12K-SF EU |
|---|---|---|---|
| Altitude | Derate above 2,000 m | ||
| Mounting / cooling | Wall mount / air cooling | ||
| Communication / display | RS232 / RS485 / dry contact / Wi-Fi; LCD | ||
| Dimensions L×W×H (mm) | 444.7×346.6×120 | 444.7×346.6×120 | 630×525×125 |
| Net weight | 9.2 kg | 12.4 kg | 28.5 kg |
| Package dimensions (mm) | 560×465×240 | 560×465×240 | 745×650×240 |
| Gross weight | 11.4 kg | 14.6 kg | 32 kg |
The source MPPT field contains a percentage; presented as efficiency. Confirm warranty and battery compatibility.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 45–47 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-900-07P-5000-G |
|---|---|
| Rated / maximum power | 5,000 / 5,500 kW |
| Maximum DC voltage | 1,500 V |
| Operating DC voltage | 1,000–1,500 V |
| Maximum DC current | 5,500 A |
| DC battery inputs | 3 / 4 |
| Rated grid voltage | 35 kV |
| Frequency / tolerance | 50 Hz / ±5 Hz |
| Power factor | −1 to +1 |
| Grid THDi | <3% |
| Feeders | 3 / 3+PE |
The source 35 kV grid rating and 37 kV equipment figures are retained separately; confirm project connection design.
| Specification | HLY-900-07P-5000-G |
|---|---|
| Full-power transition | <30 ms |
| Off-grid output | 37 kV / 5,000 kW / 50 Hz |
| Off-grid THDu | 3%, linear load |
| Overload | 1.1× continuous; 1.2× 1 min @35°C |
| Maximum converter efficiency | 99.05% |
| Transformer | Dry-type / Dy11 |
| LV / MV | 0.69 / 37 kV |
| DC / AC protection | Disconnector + fuse / circuit breaker |
| Surge protection | DC Type II / AC Type II |
| Three-unit W×D×H | 6,500 × 3,500 × 3,100 mm |
| Four-unit W×D×H | 6,600 × 3,400 × 3,154 mm |
| Cable entry | Bottom AC and DC |
| Operating temperature | −35–60°C; derate above 45°C |
| Relative humidity | 0–100% |
The source 35 kV grid rating and 37 kV equipment figures are retained separately; confirm project connection design.
| Specification | HLY-900-07P-5000-G |
|---|---|
| Altitude | 5,000 m; derate above 2,000 m |
| Protection | PCS:IP65 / other:IP54 |
| Cooling | PCS air-water cooling / other natural cooling |
| Interfaces | RS485 / Ethernet / CAN |
| Protocols | IEC61850 / Modbus RTU / TCP / EtherCAT / CAN2.0B |
The source 35 kV grid rating and 37 kV equipment figures are retained separately; confirm project connection design.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 48–50 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-600-07P-4464-G | HLY-600-07P-5160-G |
|---|---|---|
| Rated apparent power | 4,464 kVA | 5,160 kVA |
| Maximum apparent power | 4,910 kVA | 5,676 kVA |
| Maximum DC current | 199 A × 24 | 227 A × 24 |
| Maximum DC voltage | 1,500 V | |
| DC operating / full-load range | 1,000–1,500 V / 1,050–1,500 V | |
| Battery inputs | 24 | |
| Grid voltage / tolerance | 35 kV / ±10% | |
| Frequency / tolerance | 50 Hz / ±5 Hz | |
| Power factor | −1 to +1 | |
| Grid THDi | <3% | |
The source mixes kVA and kW. Confirm off-grid power and transformer matching for the 4,464 model; no equivalence is assumed.
| Specification | HLY-600-07P-4464-G | HLY-600-07P-5160-G |
|---|---|---|
| Feeders | 3 / 3+PE | |
| Off-grid voltage / frequency | 35 kV / 50 Hz | |
| Off-grid rated power (source) | 4,910 kW | 5,160 kW |
| Off-grid THDu | 3%, linear load | |
| Overload | 1.1× 4 h; 1.2× 1 min | |
| Transformer rating | 5,030 kVA | 5,280 kVA |
| Transformer type / vector group | Oil/dry type; Dy11 | |
| MV / LV | 37 / 0.69 kV | |
| DC protection | DC circuit breaker | |
| AC protection | PCS fuse / MV circuit breaker | |
| Surge protection | DC Type II / AC Type II | |
| Dimensions W×D×H | 9,700 × 3,400 × 3,200 mm | |
| Cable entry | Bottom AC and DC | |
| Operating temperature | −40–60°C; derate above 45°C | |
| Relative humidity | 0–95% | |
The source mixes kVA and kW. Confirm off-grid power and transformer matching for the 4,464 model; no equivalence is assumed.
| Specification | HLY-600-07P-4464-G | HLY-600-07P-5160-G |
|---|---|---|
| Altitude | 2,000 m | |
| Weight | 22,000 kg | |
| Protection / cooling | IP54 / smart air cooling | |
| Interfaces | RS485 / Ethernet / CAN | |
| Protocols | IEC61850 / Modbus RTU / TCP / CAN2.0B | |
The source mixes kVA and kW. Confirm off-grid power and transformer matching for the 4,464 model; no equivalence is assumed.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 51–53 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-08GP-M-18K20 | HLY-10GP-M-30K40 |
|---|---|---|
| PV array power | 18 kWp | 30.7 kWp |
| Total weight | 5.5 t | 6.5 t |
| Deployed dimensions | 53 × 2.2 × 0.5 m | 69 × 2.4 × 0.8 m |
| Folded dimensions | 2.2 × 1.4 × 1.7 m | 2.2 × 1.5 × 2.1 m |
| Maximum slope | 1% | |
| Orientation | Any azimuth | |
| Deployment time | 50 min | 60 min |
| Container type | 8GP | 10GP |
| Container L×W×H (mm) | 2,900×2,200×2,200 | 2,991×2,438×2,591 |
| Container weight | 1.6 t | 2.5 t |
The 30K40 model designation does not reconcile with the battery count; SU-10k is also listed at 12 kW. Confirm the bill of materials.
| Specification | HLY-08GP-M-18K20 | HLY-10GP-M-30K40 |
|---|---|---|
| Inverter model (source) | SU-10k | |
| Inverter type | Grid-connected | |
| Inverter quantity | 2 | 3 |
| Inverter max input per unit | 13,000 Wp | 15,600 Wp |
| Rated / max AC per unit | 10 / 11 kW | 12 / 13.2 kW |
| AC voltage / frequency | 3L/N/PE 220/380, 230/400 V; 50/60 Hz | |
| Maximum output current per unit | 16.7 / 15.9 A | 20 / 19.1 A |
| Inverter dimensions W×H×D | 422 × 702 × 281 mm | |
| Inverter weight | 33.6 kg | |
| Inverter temperature (source) | 25–65°C; lower limit to confirm | |
| Inverter communication | RS485 / RS232 / Wi-Fi / LAN | |
| Battery module | LFP 10kWh / LV | |
| Battery capacity / voltage per set | 200 Ah / 51.2 V DC | |
| Battery energy | Source:10.24 kW; unit to confirm | |
| Battery sets | 2 | 2 |
| Battery charge / peak discharge | 5 kW / 10 kW (3 s) | |
| Battery dimensions W×H×D | 585 × 940 × 205 mm | |
| Battery weight / communication | 116.5 kg / RS485 | |
The 30K40 model designation does not reconcile with the battery count; SU-10k is also listed at 12 kW. Confirm the bill of materials.
| Specification | HLY-08GP-M-18K20 | HLY-10GP-M-30K40 |
|---|---|---|
| Battery operating temperature | −20–50°C; derate above 45°C | |
| Generator model / quantity | KDE6700X3 / 1 | |
| Generator rated / peak power | 5.5 / 6 kVA | |
| Generator Hz / voltage / current | 50 Hz / 203/400 V / 7.9 A | |
| Generator dimensions / weight | 720 × 492 × 650 mm / 95 kg | |
The 30K40 model designation does not reconcile with the battery count; SU-10k is also listed at 12 kW. Confirm the bill of materials.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 54–55 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-20GP-M-60K215 | HLY-20HQ-M-75K215 |
|---|---|---|
| PV array power | 60.5 kWp | 76.8 kWp |
| Total weight | 13.6 t | 15.2 t |
| Deployed dimensions | 91 × 3.6 × 0.8 m | 102 × 4.1 × 0.9 m |
| Folded dimensions | 3.6 × 2.0 × 2.1 m | 4.1 × 2.2 × 2.4 m |
| Maximum slope / orientation | 1% / any azimuth | |
| Deploy / fold time | 80 / 60 min | 100 / 80 min |
| Installation personnel | 4 | |
| Container type | 20GP | 20HQ |
| Container L×W×H (mm) | 6,058×2,438×2,591 | 6,058×2,438×2,896 |
| Container weight | 2.2 t | 2.5 t |
The source title states PV + storage, while its table includes a diesel generator. Confirm inclusion and quantity.
| Specification | HLY-20GP-M-60K215 | HLY-20HQ-M-75K215 |
|---|---|---|
| Rack material | Carbon-steel square tube | |
| Rack dimensions (mm) | 3,552×2,103×30 | 4,079×2,375×35 |
| Panels per rack / rack count | 3 / 42 | |
| Deployment angle | 15° | |
| Deployed rack length | 84 m | 95 m |
| Deployed rack area | 298 m² | 388 m² |
| Storage module | DH200F | |
| Battery capacity / energy | 280 Ah / 215 kWh | |
| Rated storage charge power | 100 kW | |
| Storage voltage / frequency | 672–864 V / 50 Hz | |
| Storage W×H×D (source) | 1,850 × 1,200 × 2,250 mm | |
| Storage weight / quantity | ≈3,300 kg / 1 | |
| Storage communication | RS485 | |
| Storage operating temperature | −30–50°C; derate above 45°C | |
| Diesel generator (source) | KDE16EA3 | |
| Generator rated / peak power | 13.8 / 15 kVA | |
| Generator Hz / voltage / current | 50 Hz / 203/400 V / 47.8 A | |
| Generator dimensions / weight | 930 × 660 × 910 mm / 230 kg | |
The source title states PV + storage, while its table includes a diesel generator. Confirm inclusion and quantity.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
The series and source pages are included in your brief. You can shortlist up to 15 references.
Review your project brief →Catalogue pp. 56–57 · Original model references retained. Confirm the configuration in the written technical offer.
| Specification | HLY-40GP-M-160K | HLY-40HQ-M-200K |
|---|---|---|
| PV array power | 161.3 kWp | 204.9 kWp |
| Total weight | 21.5 t | 26.5 t |
| Deployed dimensions | 91 × 9.5 × 0.8 m | 102 × 10.8 × 0.9 m |
| Folded dimensions | 9.5 × 2.0 × 2.1 m | 10.8 × 2.4 × 2.2 m |
| Maximum slope / orientation | 1% / any azimuth | |
| Deploy / fold time | 160 / 100 min | 200 / 120 min |
| Installation personnel | 8 | |
| Container type | 40GP | 40HQ |
| Container L×W×H (mm) | 12,192×2,438×2,591 | 12,192×2,438×2,896 |
| Container weight | 4.2 t | 4.8 t |
The source title mentions storage but provides no battery rating. A pictured cabinet does not establish included storage.
| Specification | HLY-40GP-M-160K | HLY-40HQ-M-200K |
|---|---|---|
| Inverter model | SUN-80k | SU-100k |
| Inverter type / quantity | Grid-connected / 2 | |
| Maximum input per inverter | 104 kWp | 150 kWp |
| Rated / max AC per inverter | 80 / 88 kW | 100 / 111 kW |
| AC voltage / frequency | 3L/N/PE 220/380, 230/400 V; 50/60 Hz | |
| Maximum output current | 133.3 / 127.5 A | 166.7 / 159.4 A |
| Inverter dimensions W×H×D | 838 × 568 × 324 mm | |
| Inverter weight | 81 kg | |
| Inverter operating temperature | −25–65°C | |
| Inverter communication | RS485 / RS232 / Wi-Fi / LAN | |
| Rack material | Carbon-steel square tube | |
| Rack dimensions (mm) | 4,726×2,103×30 | 5,427×2,375×35 |
| Panels per rack / rack count | 4 / 42 | |
| Deployment angle | 15° | |
| Deployed rack length | 84 m | 95 m |
| Deployed rack area | 395 m² | 515 m² |
| Storage capacity / scope | Not supplied; confirm per project | |
The source title mentions storage but provides no battery rating. A pictured cabinet does not establish included storage.
“To confirm” and source limitations are retained. Listed ratings do not establish compatibility, local approval or a warranty for an unspecified configuration.
Measure the usable installation area, not just the total roof area. Share roof drawings, obstructions, access routes and mounting constraints.
Module nameplate power alone does not define a complete array. Array design must be reviewed against inverter limits and the site layout.
Request the selected module datasheet. Open-circuit voltage, operating voltage and current are checked as part of string and inverter design.
Discuss wall construction, mounting access and the selected model’s mounting instructions. A wall-mounted illustration does not confirm that every battery can be wall mounted.
Confirm the supported number of modules, base arrangement, communication architecture and expansion process for the selected system.
Review rack dimensions, module access, cabling space and the manufacturer’s ventilation instructions before finalising a layout.
Expansion is model specific. Confirm module compatibility, commissioning requirements and any limits on mixing modules before ordering.
Ask for written confirmation of the selected battery and inverter pairing, communication protocol, supported firmware and commissioning procedure.
Provide dimensions and photographs of the proposed location. Access, environment, service clearance and local installation requirements all affect the choice.
Share the site supply arrangement, priority loads and starting loads. Confirm the selected inverter’s operating modes and output limits.
Share the phase arrangement and load distribution. Unbalanced loads, backup circuits and parallel operation need model-specific review.
Operating modes differ by model. Confirm grid interaction, backup switching, generator integration and any required external devices.
A matching voltage label is not enough. Confirm electrical limits, battery control communication and the supported firmware combination.
Define whether monitoring is local or remote, who owns account access and which communication options are supplied.
Provide running loads and starting loads separately. Backup priorities and load changes should be included in the design brief.
Confirm the room environment, access and installation rules with the local installer. The model datasheet defines operating and placement limits.
Outdoor placement needs model-specific environmental protection, temperature and site review. A rendering does not establish an outdoor rating.
Agree the battery, power conversion, controls, protection and communication interfaces as one documented system scope.
Review the supported cabinet arrangement and system controller before planning expansion. Confirm both present needs and future phases.
Provide site access, foundation information, installation dimensions and the local engineer’s requirements for the proposed location.
Plan routine access, replacement routes, isolation provisions and documentation handover with the responsible installation team.
Define the battery, power conversion, thermal management, controls and project-specific protection scope with the engineering team.
Review delivery access, lifting, foundation, cable routes and the required site clearances with qualified local professionals.
Confirm shipping dimensions and mass, route restrictions, packaging and required transport documentation for the actual consignment.
Share the demand profile, operating objective, connection arrangement and site conditions before requesting a container system quotation.
Mounting selection depends on the installation surface, layout and local structural requirements. Share roof or ground information with the installer.
Cable specification is part of electrical design. Supply lengths, installation methods and connection details for qualified engineering review.
Protection and isolation must be coordinated with the system architecture and applicable local requirements. Confirm the scope in the supply list.
Define the required measurements, communication method, account access and remote support needs before choosing monitoring equipment.
Check solar modules, storage, inverter, mounting, cables, protection and monitoring individually. Mark supplied, locally sourced and excluded items.
Home and factory paths meet in one project brief, then continue on WhatsApp.
WhatsApp +86 182 0104 2779Contact opens the project planner; WhatsApp can carry your prepared brief.